1. General
ET8661 GPRS/SMS+IP FAM (Fixed Asset Monitoring)
support both GPRS and IP communcaiton, embedded GPRS module and provide
Ethernet interface, both GPRS and IP communication can be mutual backup or user
specify the communication channel, it is help for ensure communication between
FAM and alarm center.
ET8661 is an enhanced GPRS/SMS
messenger (GPRS or CDMA service optional) which integrated with I/O port, RTU
(Remote Terminal Unit), Relay, Sensor functions, it has more I/O ports than
ET8610, and support wireless sensor which can help people to security monitoring,
control, SMS alarm the remote area.
ET8661 GPRS/IP FAM main application
filed is home security, power grid automatization, industrial monitoring,
traffic management, weather, finance, Basic Environment protecting, colliery,
Oil field etc, especially, apply in security, remote control. Implement transparent
data transmission over GPRS/SMS and IP network.
2. Feature
· Support both GPRS/SMS and IP networks
ET8661 GPRS/IP FAM provides GPRS/SMS and IP
communications, both communication tunnels can be back up each other, when the
IP network communications failures that can automatically switch to GPRS
communication, and when detected IP network back to normal, FAM can switching back
to the IP network automatically, it saving GPRS communication fee. User also
can specify the communication tunnel that FAM works at GRS or IP network.
· Basic TCP/IP network data transmission
FAM supports Ethernet port, just a simple configuration,
FAM can quickly through user IP network to connect data center.
· More I/O ports
ET8661 GPRS/IP FAM provides 7 DI, 4 AI, 4 DO, 2 TE ports,
it provides more I/O ports than ET8610, and compatible for more I/O sensors.
· Support Wireless Sensor
ET8661 GPRS/IP FAM supports RF wireless sensors,
connected through RF433.92Mhz frequency with wireless sensors,20-way wireless
zones, support 60 wireless sensors, and real-time monitoring of the state of
the sensor, when the sensor battery is low or disconnect the connection, tamper
switch, FAM will send alarm information.
· Industrial Design
GPRS/IP FAM is industrial design which built-in watchdog
chipset to ensure the system work continuously, Watchdog monitoring the GSM module
and CPU all the time, if the GSM module or CPU does not response for long time,
FAM will restart automatically. FAM is very suitable for long-term continuous
work applications.
· Transparent data transmission
GPRS/IP FAM provides full transparent data transmission
channel through RS232 interface it use for connect different types of PLC, RTU which
extend the scope of FAM application, and better services for users.
· Main and backup data center
GPRS/IP FAM support main and backup data center, user can set both main
data center ip address or domain name, when FAM fail to connect with main data
center, it will try to connect backup data center automatically.
· Embedded Li-battery and Temperature sensor
GPRS/IP FAM built-in 1000mA Lithium battery, it can work for 6 hours if
the external power supply cut off. Also, FAM will send alarm message to notify
the user that the external power supply was cut off. the built-in temperature
sensor can real-time monitoring of environment temperature, FAM also support t external
digital temperature sensor that monitor user’s device surface temperature, when
the temperature lower or higher than the specified value, FAM will send alarm
message, when the temperature returned to normal, FAM will send notice message
to user also.
· User-define alarm SMS
ET8661 GPRS/IP FAM support User-define alarm SMS, according to alarm port status, FAM will choose the user pre-stored
content, and send to user mobile phone by SMS, it’s easy for user to read alarm
message.
· I/O status Buffer
ET8661 FAM has NVRAM buffer to save the I/O status data during GPRS/SMS
tunnel problem, when the GPRS/SMS tunnel return to normal, FAM will send buffer
all data immediately, due to use NVRAM, even Power lose, the buffer data will
still save.
· Ring and SMS alarm
FAM support ring and SMS to send alarm message, when the alarm happen, FAM
will start ring for 10 seconds, and then send alarm SMS to users. Users also
can remote setting and control FAM by SMS.
· SMS receipt
To ensure user receive the alarm messages, user can set the alarm SMS
resend frequency, unless the alarm clear or receive ACK message receipt from
user phone, FAM will repeat to send alarm SMS by Specified frequency and
interval.
· Alarm clear message
All of FAM I/O port can be set the alarm clear message, when the port
alarm status clear, FAM will send alarm clear SMS to notice user.
· Regularly report the I/O status
ET8661 FAM support auto send I/O port status by specified time, after user
set the time, FAM will send the port status on specified time daily.
· DO port programmable output
FAM DO
(digital output) port supports programmable output, according to the
requirement of user site, the level of output level, switching time, times
would be programmable.
· Zone type
FAM DI ports
support zone type setting which can be set to as common zone, delay zone,
intelligent zone, emergency zone, home zone, according to the user site
conditions and sensor type, set the correct zone type to prevent false alarm,
missing alarm.
· Alarm Trigger Duration
According to
part of the sensor (such as: float level sensor, temperature sensor, voltage
sensor, etc.) under certain conditions, wandering in the alarm and alarm clear
status, and occur false alarm, repeated alarm. FAM alarm controller DI, AI, TE
interface supports trigger duration function, the user can enter the specified
port trigger duration, when the port state to the alarm value and after
specified period, then trigger alarm.
· GPRS SMS work at the same time
FAM communication through GPRS to data center, at the same time, FAM also
can occur SMS to the user's mobile phone, so that’s insuring the user receive
the alarm message via GPRS and SMS.
· SMS password, RFID TAG, Keypad password, Fingerprint Authentication, Timing
Arm/Disarm
FAM support multiple Arm/Disarm function, it can perform a specified time
every day to Arm/Disarm; FAM also support any mobile phone number via a
password to Arm/Disarm; RFID TAG way to Arm/Disarm; Fingerprint authentication
to Arm/disarm. After the instruction is executed successfully, FAM will send the
Arm/Disarm information to the administrator phone as well.
· Camera capture picture
FAM provides
the interface to connect with camera, real-time remote image capture, with the
FAM IO ports trigger function, real-time capture images when an alarm is
generated, and sent to the data center; FAM can be set to a fixed time interval
for continuous capture images as well.
· Micro SD slot (TF Slot)
FAM provide
Micro SD Slot (slot TF slot) that is used to store camera photo/alarm log/arm
disarm log data, when the alarm generated, FAM can receive the photo data from
the camera and store into the Micro SD card, then sent to the data center via
the GPRS network, it overcome the instability GPRS network transmission of
large data, and ensure the photos never lost.
· USSD calls fee inquiry, AGPS base station location
FAM supports
USSD way to check SIM card calls fee and inquiries AGPS base station
positioning. through AT commands, we can check SIM card calls fee, and
recharger SIM card on time to prevent arrears that affect the normal operation;
also, we can use AT command to check base station code, it is able to locate
the position of the device.
· LED indicator to display Arm and Disarm
FAM DO port
can be connected to 12V dual color LED lights, and displays the current Arm and
Disarm status. Red indicates the FAM is ARM status, Green indicates FAM is
Disarm status.
· MODBUS Protocol programmable output
FAM provides
storage and forwarding the command functions of the MODBUS protocol, users can
pre-save the common command to FAM, and FAM will send the command PLC/RTU via
RS232/485 port by the specified time interval automatically.
· Clock synchronization
FAM support clock synchronization; it can read the clock from SMS or get
clock from management platform by GPRS.
· Cell phone and PC be Data service center
GPRS/SMS FAM supports cell phone and PC server to be data service center,
if PC to be service center, please use eTel FAM management platform software,
it supports SQL data base, Google map etc. it can monitor thousands FAM via
GPRS; if the stations exceeds 500 points, we suggest use FAM management
platform.
· Graphical configuration software
ET8610 GPRS/SMS
FAM provide full graphical software configuration, easy to use, and supports
import or export configuration file; so users just simply click a few icons to
quickly setup FAM system.
· Worldwide applications
ET8661 GPRS/SMS FAM has broad range of applications;
it can be used in industrial remote monitoring, security, meteorology,
environmental protection, water conservancy, electric power industries.
To more suitable of industrial M2M applications, eTel can quickly modify the
software and hardware according to customer requirements.