PRODUCTS
Your location:Home - GPRS/SMS FAM

ET8511 IP FAM
IP network data transmission
Provide Ethernet / RS232 / 485 interface
Famer management platform
IO ports: 7 DI, 4 AI, 4 DO, 2 TE
Support wireless and wired sensor
Support LED Screen
Support camera for photograph
  • Function
  • Specifications
  • Typical applications

1. General

ET8511 IP FAM (Fixed Asset Monitoring) is an enhanced controller which integrated with I/O port, RTU (Remote Terminal Unit), Relay, Sensor functions, it can help people to monitoring, control the remote devices.

ET8511 IP FAM main application filed is Power grid automatization, industrial monitoring, traffic management, weather, finance, Basic Environment protecting, colliery, Oil field etc, especially, apply in security, remote control.

2. Feature

·           More I/O ports

ET8511 IP FAM provides 7 DI, 4 AI, 4 DO, 2 TE ports, it provides more I/O ports than ET8511, and compatible for more I/O sensors.

·           Support Wireless Sensor

ET8511 IP FAM supports RF wireless sensors, connected through RF433.92Mhz frequency with wireless sensors, 20-way wireless zones, support 60 wireless sensors, and real-time monitoring of the state of the sensor, when the sensor battery is low or disconnect the connection, tamper switch, FAM will send alarm information.

·           Industrial Design

ET8511 IP FAM is industrial design which built-in watchdog chipset to ensure the system work continuously, Watchdog monitoring the system all the time, if system does not response for long time, Reader will restart automatically. Reader is very suitable for long-term continuous work applications.

·           Basic TCP/IP network data transmission

FAM supports Ethernet port, just a simple configuration, FAM can quickly through user IP network to connect data center.

·           Embedded Li-battery and Temperature sensor

ET8511 IP FAM built-in 1000mA Lithium battery, it can work for 3 hours if the external power supply cut off. The built-in temperature sensor can real-time monitoring of environment temperature and the outside TE port can be extended to the user device surface to monitoring equipment temperature.

·           I/O status Buffer

ET8511 IP FAM has NVRAM buffer to save the I/O status data during network tunnel problem, when the network tunnel return to normal, FAM will send buffer all data immediately, NVRAM has feature for save data even power lose, so even FAM power lose, the buffer data will still save.

·           Regularly report the I/O status

ET8511 IP FAM support auto send I/O port status by specified time, after user set the time, FAM will send the port status on specified time daily.

·           DO port programmable output

FAM DO (digital output) port supports programmable output, according to the requirement of user site, the level of output level, switching time, times would be programmable.

·           Zone type

FAM DI ports support zone type setting which can be set to as common zone, delay zone, intelligent zone, emergency zone, home zone, according to the user site conditions and sensor type, set the correct zone type to prevent false alarm, missing alarm.

·           Alarm Trigger Duration

According to part of the sensor (such as: float level sensor, temperature sensor, voltage sensor, etc.) under certain conditions, wandering in the alarm and alarm clear status, and occur false alarm, repeated alarm. FAM alarm controller DI, AI, TE interface supports trigger duration function, the user can enter the specified port trigger duration, when the port state to the alarm value and after specified period, then trigger alarm.

·           RFID TAG, Keypad password, Fingerprint Authentication, Timing Arm/Disarm

FAM support multiple Arm/Disarm function, it can perform a specified time every day to Arm/Disarm; RFID TAG way to Arm/Disarm; Fingerprint authentication to Arm/disarm.

·           Camera capture picture

FAM provides the interface to connect with camera, real-time remote image capture, with the FAM IO ports trigger function, real-time capture images when an alarm is generated, and sent to the data center; FAM can be set to a fixed time interval for continuous capture images as well.

·           Micro SD slot (TF Slot)

FAM provide Micro SD Slot (slot TF slot) that is used to store camera photo/alarm log/arm disarm log data, when the alarm generated, FAM can receive the photo data from the camera and store into the Micro SD card, then sent to the data center.

·           LED indicator to display Arm and Disarm

FAM DO port can be connected to 12V dual color LED lights, and displays the current Arm and Disarm status. Red indicates the FAM is ARM status, Green indicates FAM is Disarm status.

·           MODBUS Protocol programmable output

FAM provides storage and forwarding the command functions of the MODBUS protocol, users can pre-save the common command to FAM, and FAM will send the command PLC/RTU via RS232/485 port by the specified time interval automatically.

·           Clock synchronization

FAM support clock synchronization; it can read the clock from management platform by IP network.

·           Graphical configuration software

ET8511 IP FAM provide full graphical software configuration, easy to use, and supports import or export configuration file; so users just simply click a few icons to quickly setup FAM system.

·           Worldwide applications

ET8511 IP FAM has broad range of applications; it can be used in industrial remote monitoring, security, meteorology, environmental protection, water conservancy, electric power industries.
To more suitable of industrial M2M applications, eTel can quickly modify the software and hardware according to customer requirements.