PRODUCTS

FAM3520 Solar Controller
Solar Power System
10A Solar Controller
Rated Charge Current: 10A 
Rated load current: 10A 
System voltage: 12V 
Overload, short-circuit protection
PWM pulse width modulation
Temperature compensation
  • Function
  • Specifications
  • Typical applications

1. General

Our controllers are specially designed for solar power DC supply system, solar power DC street lamp system and mini solar power station system. Intelligent control is realized by using dedicated computer chips. The controllers can be used in hard environment, since its adoption of technical grade chips. To the controllers with 12V/24V automatic identification function, the system will identify the voltage when the controllers are charged initially.

The short circuit, over-load, connection-reverse protection, as well as over-charge, over-discharge protection are available. Besides, the complete indications are usable, including indications for states of charge, storage battery and faults.

Through the computer chips, the controllers take samples from the parameters of storage battery voltage, photo battery, discharge current and environment temperature, and then use the dedicated control mode calculation to control the discharge rate and make it matched with the characters of storage battery, realize the high accurate temperature compensation. PWM fuzzy charge mode and 7 phase voltage control are available for the storage battery, so that storage battery is always in the perfect working state .The various working modes of controllers can meet customers’ different requirements

2. Specifications

·         Model: FAM3520-10A, optional 15A, 20A, 30A

·         Rated Charge Current: 10A

·         Rated load current: 10A

·         System voltage: 12V

·         overload, short-circuit protection: 1.25 times rated current 60 seconds .1.5 times the rated current for 5 seconds overload protection actions, ≥ 3 times the rated current short circuit protection

·         No-load loss: ≤ 6 mA

·         Charging circuit voltage drop: less than 0.26V

·         Discharge circuit voltage drop: less than 0.15V

·         overpressure protection: 17V, × 2/24V;

·         Operating Temperature: Industrial: -35 ℃ to +55 ℃ (suffix I);

·         Enhance the charging voltage: 14.6V; × 2/24V; (maintenance time: 10min) (call only when there is over-discharge)

·         Direct charge voltage: 14.4V; × 2/24V; (maintenance time: 10min)

·         Float: 13.6V; × 2/24V; (duration: until reduced charge return voltage action)

·         Charge return voltage: 13.2v; × 2/24V;

·         Temperature compensation:-5mv / ℃ / 2V (promotion, direct charge, floating charge return voltage compensation);

·         Under Voltage: 12.0V; × 2/24V;

·         Over discharge voltage: 11.1V-discharge rate compensation corrected initial over-discharge voltage (load voltage); × 2/24V;

·         Over-discharge voltage return: 12.6V; × 2/24V;

·         Control: Charge for the PWM pulse width modulation